Patch: Add Peek & Poke Syscalls to PS3 Firmware 3.55

Here is a patch that adds peek & poke syscalls to PS3 Firmware
3.55. From what I understand, with peek & poke, Backup Managers can easily be adapted to work with said firmware. But first, you must do this:

1. Download OFW PS3 3.55 here
2. Download flukes1 and netkas' modified PUP (includes bsdiff too) here
3. Download geohot's modified PUP here
4. If you're running geohot or KaKaRoTo's CFW, restore OFW 3.55 first:
1. Ensure the OFW 3.55 PS3UPDAT.PUP is in /PS3/UPDATE/ on your USB device.
2. Power down the PS3.
3. Now press and hold the power button, the system will startup and shutdown again.
4. Release the power button, then press & hold power again, you'll hear one beep followed by two consecutive beeps.
5. Release power then follow the on-screen instructions. You're now in the recovery menu.
6. Connect the USB device and select "System Update."
5. Rename PS3UPDAT-PEEKPOKE.PUP to PS3UPDAT.PUP and copy to your USB storage device under /PS3/UPDATE/ overwriting the previous one
6. Now flash this newly generated PUP to your PS3 running OFW 3.55 from the Settings -> System Update menu
7. Upon success, flash geohot's modified PUP and you're set
8. Wait for a newer Backup Manager

Simpler Instructions,

-Make sure your on Official Sony 3.55 Firmware.
-Boot to recovery mode and update to this peek and poke after renaming it to PS3UPDAT.PUP and putting it on a usb stick.
-Once that's done, update to geohot's 3.55-jb firmware and your previous 3.55 jailbroken firmware will be patched

Emm..there is no link